Agilent Technologies 5975 Series User Manual

5975/5977 Series MSD Operating Manual 75
4 Operating in EI Mode
Operating the MSD from the DS 76
Operating the MSD from the GC Control Panel 77
Configuring the MSD Through the Web User Interface (WUI) 81
Operating the 5975/5977 MSD From the Local Control Panel (LCP) 84
eModule Mini Display Readout 91
Front Panel Instrument Status LED 91
The GC/MSD Interface 92
Before You Turn On the MSD 94
Pumping Down 95
Controlling Temperatures 95
Controlling Column Flow 95
Venting the MSD 96
Set MS Analyzer Temperatures 97
Enable the GC/MS Interface and Oven 99
View MSD Temperatures and Vacuum 100
To Run an Autotune 102
To Open the MSD Covers 103
Vent the MSD 104
To Pump Down the MS 106
To Move or Store the MSD 109
This chapter describes how to perform some basic operating procedures for the
Agilent 5975/5977 series GC/MSD using electron ionization.

Agilent Technologies 5975 Series Specifications

General

Brand	Agilent Technologies
Model	5975 Series
Category	Laboratory Equipment
Language	English