Agilent Technologies 5977C Inert+ MSD User Manual

5977C GC/MSD Operating Manual 55
3 Installing Intuvo 9000 GC
Columns
Columns 56
To Replace an Intuvo GC Column 59
To Replace an Intuvo 9000 GC Gasket 63
To Install a Column Guard or Jumper Chip 64
To Replace the 9000 GC/MS Tail 68
To Install the GC/MSD Interface Tip Seal 74
The GC/MSD Interface for a 9000 Series GC 76
This chapter shows you how to install an Agilent Intuvo column, connect the flow
path from the inlet through the guard chip, bus components, and column to the MS
Tail assembly, and maintain the column guard chip.
If you are using the Agilent Intuvo 9000 Gas Chromatograph with your MSD,
Chemical Ionization (CI) is not currently supported. The Agilent JetClean system is
supported.

Agilent Technologies 5977C Inert+ MSD Specifications

General

Brand	Agilent Technologies
Model	5977C Inert+ MSD
Category	Security Sensors
Language	English