Agilent Technologies 5977C Inert+ MSD User Manual

4 Operating in EI Mode
Operating the MSD from the DS
5977C GC/MSD Operating Manual 79
Operating the MSD from the DS
The Agilent MassHunter GC/MS Acquisition software automates tasks such as
pumping down, monitoring settings, setting temperatures, tuning, and venting
the MSD. These tasks are described in this chapter. Additional information is
described in the manuals and online help supplied with the Agilent MassHunter
GC/MS Acquisition software.
CAUTION
The software and firmware are revised periodically. If the steps in these
procedures do not match your Agilent MassHunter GC/MS Acquisition
software, refer to the manuals and online help supplied with the software for
more information.

Agilent Technologies 5977C Inert+ MSD Specifications

General

Brand	Agilent Technologies
Model	5977C Inert+ MSD
Category	Security Sensors
Language	English