Agilent Technologies 6430 User Manual

Agilent MassHunter Workstation Software - Data Acquisition for 6400 Series Triple Quadrupole 4
Acquisition
Agilent 6400 Series Triple Quad LC/MS Concepts Guide 69
Acquisition
Many Agilent LC modules and the 6400 Series Triple
Quadrupole MS can be controlled and monitored (Instrument
Status window) from the same program used for entering
acquisition settings (Method Editor window) and setting up lists
of samples to run (Worklist window)(Figure 34 on page 66).
The Chromatogram Plot window also can show the MS and UV
chromatograms in real time.
Because of the large amount of information available, any of
these windows can be closed for easier viewing, if necessary.
However, one of the windows must always be open.
Figure 37 Instrument Status and real-time plot windows

Agilent Technologies 6430 Specifications

General

Brand	Agilent Technologies
Model	6430
Category	Laboratory Equipment
Language	English