3-68
Function Reference
Recall From (Recall Setup Panel)
When Trace(s) Only is selected, the trace data is displayed under the current
instrument conditions.
Note To insure accurate measurements, a wavelength calibration should be
performed each time measurement is recalled from memory.
Key Path Save/Recall > Recall Menu > Recall
Remote
Commands
(Measurement) *RCL
(Trace Only):MMEMory:LOAD:TRACe
(File Share):MMEMory:CATalog?FSHare1FSHare2|FSHare3|FSHare4
Recall From (Recall Setup Panel)
Selects whether the data is recalled from a floppy disk, from internal memory,
or from network file share. See “Recalling Measurement and Trace Data” on
page 2-24
Key Path Save/Recall > Recall Menu > Recall From
Remote
Commands
*RCL FLOPpy|INTernal|Network File Share
MMEMory:LOAD:TRACe
To Next Page
Loading...
