Agilent Technologies E4403B User Manual

Chapter 4 4-15
Troubleshooting
Status Messages
Source Unlevel (Source Unleveled)
Indicates the source power is set higher or lower than
the analyzer can provide, the frequency span extends
beyond the specified frequency range of the tracking
generator, or the calibration data for the source is
incorrect.
(TG Align Failure) status bit only, no message
A failure has occurred during the tracking generator
(TG) alignment.

Agilent Technologies E4403B Specifications

General

Brand	Agilent Technologies
Model	E4403B
Category	Measuring Instruments
Language	English