Agilent Technologies G7077B User Manual

5 Operating in EI Mode
To Set Monitors for MSD Temperature and Vacuum Status
5977B Series MSD Operating Manual 119
To Set Monitors for MSD Temperature and
Vacuum Status
A monitor displays the current value of a single instrument parameter. They can
be added to the standard instrument control window. Monitors can be set to
change color if the actual parameter varies beyond a user-determined limit from
its setpoint.
Procedure
1 In Instrument Control view, select Edit Monitors from the Instrument menu to
display the Select Monitors dialog. (See Figure 34.)
2 In the Available Monitors column, select a monitor, and click Add to move the
selection to the Selected Monitors column. Repeat for additional monitors.
3 Click OK. The new monitors will be stacked on top of each other in the lower
right corner of the Instrument Control window.
Figure 34 Select monitors dialog

Agilent Technologies G7077B Specifications

General

Brand	Agilent Technologies
Model	G7077B
Category	Water Pump
Language	English