The GTA Viewing/Fume Extraction Accessory (Optional)
46 Agilent Graphite Tube Atomizer GTA 120 User’s Guide
Figure 12. The support
bracket in the position for
Zeeman instruments
Figure 13. The support
bracket in the position
for D
2
instruments
2 Set the mounting bracket to the highest position and gently
tighten the screws.
3 Clip the accessory onto the flame shield. Make sure that the edge
of the flame shield fits between the spring canoe-clips. Refer to
Figures 14, 15 and 16.
Figure 14. The GTA viewing/fume extraction accessory clips onto the flame
shield and is secured by spring-clips.
Edge of flame shield
Support bracket Mounting bracket
To Next Page
Loading...
