Making Your First Measurements
Connecting USB, GPIB or LAN
Chapter 224
Configuring the Connection Expert
1. Run the Connection Expert program. It can be opened by double clicking the
icon in windows notification area or from the windows task bar, Start>All
Programs>Agilent IO Libraries Suite>Agilent Connection Expert.
2. Right click on the LAN Interface section. Shown in Figure 2-8.
3. Choose Add Instrument. Shown in Figure 2-8.
Figure 2-8 The Connection Expert Screen
4. In the pop up screen ensure LAN (TCIP0) is selected.
5. Click OK.
N4010-90086.book Page 24 Monday, November 18, 2013 9:20 AM
To Next Page
Loading...
