Making Your First Measurements
Running the Graphical Measurement Application (GMA) N4017A.
Chapter 234
If you have previously installed the Agilent N4017A Bluetooth GMA, the Agilent I/O
Libraries Suite software and the Microsoft .NET Framework service pack 1, using
the procedure described in the N4010A CD-ROM Installation Guide, you can
proceed directly to Step 2.
Step 1. Installing the Bluetooth GMA
1. Insert the Measurement Applications and Help Installer into your CD drive.
If the CD does not auto-start, from your task bar select Start > Run. In the field
enter <CDdrive>:\setup where <CDdrive> is the letter of your CD drive.
2. Follow the on-screen instructions.
3. The Installation completes.
Step 2. Obtain your GMA license.
1. Use the information on your Software Entitlement Certificate to obtain and
install the GMA license.
2. Close all programs.
You have completed Step 1 of the 3 Step process.
N4010-90086.book Page 34 Monday, November 18, 2013 9:20 AM
To Next Page
Loading...
Need help?
General
