Agilent Technologies U1241B - Removing Logged Data; Reviewing Logged Data; Scanning Temperature Measurement (U1242 B)

Features and Functions 2
U1241B/U1242B User’s and Service Guide 23
Figure 2-7 Interval logging display
Reviewing Logged Data
1 Press (View) for more than one second to enter Log View mode.
The last recorded entry and last logging index are displayed on the
secondary display.
2 Press to ascend or to descend through logged data. Press to
select the first record and press to select the last record for quick
navigation.
3 Press to switch between hand (manual) and interval (automatic)
logging review mode.
4 Press (View) for more than one second to exit Log View mode.
Removing Logged Data
Press (Log) for more than one second at the respective Log Review
mode (hand or interval) to clear all logged data in the memory.
Scanning Temperature Measurement (U1242B)
This scanning temperature measurement function allows users to measure
NOTE
Maximum data that can be stored is 200 entries. When the 200 entries are filled, FUL
annunciator is indicated on the secondary display.