20 agria Multi-Purpose Machine 400E/400K
3. Devices and Operating Elements
The agria multi-purpose machine type
400 is a basic power machine and is
always operated with an attachment
mounted. Therefore, the machine is
suited for agricultural and forestal op-
erations, horticulture and park mainte-
nance as well as for ground clearing and
winter service.
Available attachments are:
l
hoeing and tilling
l
mowing
l
turf and grounds care
l
ploughing
l
sweeping
l
gravel and salt spreading
l
snow dozing and rotory snow
cleaning
l
transporting
Engine
The four-stroke petrol engine runs on
conventional petrol (refer to fuel recom-
mendations p4). During the first 20 op-
erating hours (break-in period) do not
use engine to maximum power. Even
after the break-in period never use
engine at higher speed than necessary
for the work in hand.
I
High engine speed is harmful
to any engine and consider-
ably affects its durability. This applies
especially for no load operation. Any
overspeed (have the engine roar) can
result in immediate damage.
Cooling System
Cooling system is fan-cooled. Therefore
keep screen at recoil starter and cool-
ing fins of the cylinder clean and free
from sucked-in plant trash.
Idling-speed
Always ensure that idling-speed is ad-
justed correctly. At low speeds and with
the speed control lever set to idle, the
engine is supposed to run smoothly and
without run-out.
Air Filter
The air filter purifies the air intake. A
blocked filter reduces engine output.
Ignition System
The engine is equipped with a contact-
less ignition system. We recommend to
have necessary check-ups done by an
expert only.
3
To Next Page
Loading...
