agria Multi-Purpose Machine 400E/400K 57
Problem Possible cause Possible solution Page
Engine -Air filter clogged Clean air filter 47
output too low -Loose cylinder head or Tighten cylinder head,
¬
49
damaged sealing exchange sealing
- Poor compression Have engine checked
¬
Travelling drive - Incorrect hand clutch lever adjustment Adjust hand clutch lever
¬
51
or mowing drive
does not stop
with clutch pulled
Excessive -Fastening screws loosened Tighten fastening screws 53
vibration
¬
= For this purpose contact your agria workshop.
6. Troubleshooting
6
To Next Page
Loading...
