Agromehanika AG-TRONIK S1 User Manual

AG-TRONIK
8
2 PREDSTAVITEV AG-TRONIK-a S1
• AG-TRONIK is processor-controlled device for monitoring and automatic balancing of spray on
machines for chemical protection of plants.
• It is used on combination with pressure regulator PR10EC.
• Take a few moments to familiarize yourself with component parts of AG-TRONIK.
• In picture below, zones for monitoring and managing of AG-TRONIK are introduced (Figure 1).
Figure 1
• The areas for managing and monitoring the regulation of spraying are described in table below
(Table 1).
IME
OPIS FUNKCIJE
1
ON/OFF DIODE
Informs whether the AG-TRONIK is ON.
2
TOUCH SCREEN
It enables communication with the device.
3
UP/DOWN
It enables to adjust the pressure in the system.
4
AUTOMATIC MODE
Turn ON/OFF automatic mode.
5
MAIN VALVE
Open / close the main (MAIN) valve.
6
BACK
Exit from sub-window
7
OK
Confirm the entered parameters.
8
SECTIONS
Open / close boom section.
Table 1
2
8
5
6
4
3
1
7

Agromehanika AG-TRONIK S1 Specifications

General

Brand	Agromehanika
Model	AG-TRONIK S1
Category	Controller
Language	English