AHT AC-M Operating And Maintenance Instructions

9
AC-COOLER
AC-S Typ B910 (B)
AC-M Typ B911 (B)
AC-XL
Typ B912 (B)
TABLE OF CONTENTS
11. General Information ...................................................................................... 8
12. Rating Plate and Serial Number ................................................................... 8
13. Usage ........................................................................................................... 8
14. Unpacking and Handling .............................................................................. 8
15. Installation .................................................................................................... 8
16. Electrical Connection .................................................................................... 9
17. Start-Up and Operation ................................................................................ 9
18. Electronic Controller DIXELL XR60CX ......................................................... 9
19. Operating the Night Cover (roller blind) ...................................................... 10
10. Maintenance and Cleaning ......................................................................... 10
11. Taking the unit out of operation for extended periods ................................ 10
12. Changing the Lamp .................................................................................... 10
13. Disposal ...................................................................................................... 11
14. What to do if ............................................................................................... 11
15 Exploded View Drawings and Parts Lists ................................................... 11
16.
Circuit diagram ........................................................................................... 12
17. Declaration of conformity ............................................................................ 12
Safety instructions
•
Please read this operating and maintenance guide carefully and also give it to anyone else assigned the task
of handling and using this unit. This operating and maintenance guide must be kept during the expected ser-
vice life of the unit and also always be available at the unit.
•
After delivery, immediately check the unit for transport damage and make sure it works. All safety devices
must be present and functional before operating the unit.
• The unit may only be operated in its position of use (level, horizontal, with openings to the front). (Please
observe the installation instructions.) If the unit is tilted during transport, then wait at least 2 hours before
starting it up in order to prevent any damage.
• The unit starts to run straight away once it is connected to its supply voltage. Note the power rating on the
rating plate as well as the relevant local electrical safety regulations before connecting the unit to the power
supply.
•
Do not heat the unit to more than 70°C (158°F). Do not expose the unit to direct sunlight. The ambient
temperature, however, must also not drop below 16°C (61°F).
• Cleaning with a high-pressure cleaner (steam jets) is not permitted.
• Work on the electrical system and refrigeration system may only be performed by specialists. If this is not
observed, all guarantee and liability claims become null and void.
• Sharp objects can scratch the glass panes, which may lead to their destruction (safety glass).
• Regarding disposal, please check your obligations in accordance with the national WEEE provisions
and please take the unit to the local WEEE disposal partner
• Ensure that the piping is not damaged (Do not drill into unit).
7
10
10
10
10
10
11
11
11
12
12
13
13
13
13
13
13
14
The unit starts to work after a short dealy of about 1 minute straight away once it is connected to its supply
voltage. Note the power rating on the rating plate as well as the relevant local electrical safety regulations be-
fore connecting the unit to the power supply.
Safety instructions
• Please read this operating and maintenance guide carefully and also give it to anyone else assigned the task of hand-
ling and using this unit. This operating and maintenance guide must be kept during the expected service life of the unit
and also always be available at the unit.
• The operating staff must be instructed by the market manager.
• People (including children) who are not able to use this unit safely because of their physical, sensory or mental
faculties, inexperience or lack of knowledge should only do so under the supervision or instructions of an accountable
person. Children in particular should be supervised to ensure that they do not play with the unit.
• After delivery, immediately check the unit for transport damage and make sure it works. All safety devices must be
present and functional before operating the unit.
• The unit may only be operated in its position of use (on a level surface, with openings to the front). (Please observe the
installation instructions.) If the unit is tilted during transport, then wait at least 2 hours before starting it up in order to
prevent any damage.
• The unit starts to run straight away once it is connected to its supply voltage. Note the power rating on the rating
plate as well as the relevant local electrical safety regulations before connecting the unit to the power supply.
• Do not heat the unit to more than 70°C (158°F). Do not expose the unit to direct sunlight. The ambient temperature,
however, must also not drop below 16°C (61°F).
• Cleaning with a high-pressure cleaner (steam jets) is not permitted.
• Work on the electrical system and refrigeration system may only be performed by specialists. If this is not observed,
all guarantee and liability claims become null and void.
• Sharp objects can scratch the glass panes, which may lead to their destruction (safety glass).
• Regarding disposal, please check your obligations in accordance with the national WEEE provisions and please take
the unit to the local WEEE disposal partner
• Ensure that the piping is not damaged (Do not drill into unit).
• No canisters containing ammable propellant gases may be stored in the cabinet.
• No objects such as bottles etc. are to be placed on the cabinet.
• If a glass bottle stored in the cabinet breaks, carefully remove all the broken glass from inside the cabinet, taking care
to avoid injury.
• The unit must be checked regularly for foreign bodies in the goods display area and for damage (sharp edges).
AC-COOLER
Verkaufskühlmöbel „Kühlen”
Refrigerated Display Cabinet „Cooling“
AC-S Typ B 910, B 910B
AC-M Typ B 910, B 910B
AC-XL Typ B 912, B 912B
AC-W Typ B 913, B 913B

AHT AC-M Specifications

General

Brand	AHT
Model	AC-M
Category	Freezer
Language	English