AIC Lynx - Page 45

37
Chapter 4. BIOS Conguration SettingsLynx User Manual
eMCA Settings
EMCA MCE-SMI
Enable
EMCA gen 1 Dual
Mode
EMCA gen 2 -
MSMI
Disable
Corrected Error eLog Enable Disable
Memory Error eLog Enable Disable
Processor Error eLog Enable Disable
Whea Settings
WHEA Support Enable Disable
Whea Log Memory Error Enable Disable
Whea Log Processor Error Enable Disable
Whea Log PCI Error Enable Disable
Error Injection
Settings
Mca Bank Error Injection
Support
Enable Disable
WHEA Error Injection
Support
Enable Disable
WHEA Error Injection 5.0
Extension
Enable Disable
Whea PCIE Error Injection
Support
Enable Disable
Whea PCIe Error Injection
Action Table
Enable Disable
ME Seg Error Injection
Support
Enable Disable
Enable HA Parity Check Enable Disable
Mca Bank Warm Boot
Clear Errors
Enable Disable
UPI Error
Enabling
SMI UPI Lane Failover Enable Disable
Memory Error
Enabling
Memory Error Enable Disable
Memory Corrected Error Enable Disable
Memory Leaky Bucket
Value
Min=0x0, Max=0xffff
Spare Interrupt
Error Pin CMCI
SMI Disable
NVMCTLR Errors Enable Disable
NVMCTLR Low
Priority Error
Signaling
ERR0# Pin SMI Disable
NVMCTLR High
Priority Error
Signaling
ERR0# Pin SMI Disable
Set NGN Address Range
Scrub
Enable Disable
Set NGN Host Alert Policy
for AIT Error
Poison Viral
Set NGN Host Alert Policy
for DPA Error
Poison Viral