AIC Lynx - 2.3 System Memory Setup

9
Chapter 2. Hardware SetupLynx User Manual
This server board supports 24 DDR4 2400/2666 Registered ECC SDRAM(RDIMM) / Load-
Reduced DIMM (LRDIMM).
2�2�1 DIMM Installation
Step 1 Unlock the dimm socket by pressing the retaining clips outward.
Step 2 Insert the memory module into the slot. Make sure that the dimm notch is
accurately positioned.
Step 3 Close the retaining clips to complete installation.
DIMM n
otch
2�2 System Memory Setup