AIC Lynx - APEI Configuration; H2 O IPMI Configuration

58
Chapter 4. BIOS Conguration SettingsLynx User Manual
4�4�12 H2O IPMI Conguration
H2O IPMI Conguration
IPMI Support Enable Disable
BMC Warmup
Time
Min=0, Max=240
ACPI SPMI
Table
Enable Disable
Boot Option
Support
Enable Disable
Set BIOS
version to BMC
Enable Disable
BMC
Conguration
Watchdog Timer
Support
Enable Disable
Not disable in OS Enable Disable
Watchdog Timer
Timeout
Min=2, Max=8
Watchdog Timer
Action
No Action, Hard Reset,
Power Down, Power Cycle
Power Cycle Time
Support
Enable Disable
Power Cycle Time Min=0, Max=255
Power Button Enable Disable
Reset Button Enable Disable
NMI Button Enable Disable
LAN Channel
Number
Min=0, Max=15
IPv4 Source Static DHCP
IPv6 Mode Enable Disable
IPv6 Prex Length Enable Disable
SDR List SDR List Support Enable Disable
4�4�13 APEI Conguration
APEI Conguration
ACPI Platform
Error Interface
APEI Support Enable Disable
APEI Error Injection Enable Disable
Defrag Level
ROM Space under 1/4 ROM Space under 1/3
ROM Space under 1/2 Every time When Error Occur
APEI UEFI Revision UEFI 2.2 UEFI 2.3.1