AIC Lynx - 5.3 Firmware Update

80
Chapter 5. BMC Conguration SettingsLynx User Manual
1. Boot to the DOS (MS-DOS or Free DOS is workable).
2. Enter BMC rmware directory [XXXXXLXOOOYYY_ARK];
XXXXX: project name ;
OOO: for Lynx standard version
YYY:rmware version;
K: For auxiliary version
3. Execute a�bat batch le to update the BMC rmware.
Example:
A:>cd FB201LX010003_AR1
A:\ FB201LX010003_AR1>a.bat
This is just an example. The latest BMC rmware version is available from the
FAE or AIC website.
4. After updating the BMC rmware, please turn off and then turn on the system.
5�3 Firmware Update