AIC Lynx - Page 53

45
Chapter 4. BIOS Conguration SettingsLynx User Manual
Memory
Conguration
Integrated Memory
Controller (iMC)
WR CRC
feature
Control
Auto Enable Disable
DIMM
Isolation
Enable
Auto Enable Disable
Scrambling
Seed Low
Min=0, Max=65535
Scrambling
Seed High
Min=0, Max=65535
Enable ADR Enable Disable
Legacy ADR
Mode
Enable Disable
ADR Data
Save Mode
NVDIMMs
Battery
backed DIMM
Disable
Erase-Arm
NVDIMMs
Enable Disable
Restore
NVDIMMs
Enable Disable
Interleave
NVDIMMs
Enable Disable
Custom
Refresh
Enable
Enable Disable
Custom
Refresh Rate
Min=20, Max=40
SMB Clock
Frequency
Auto 100 Khz
400 Khz 1 Mhz
DDR Cycling Enable Disable
Mem Flows Min=0x0, Max=0xffffffff
Mem Flows
Ext
Min=0x0, Max=0xffffffff
DIMM Rank
Enable Mask
Enable Disable
Socket 0
Channel 0~5
Rank Enable
Bit Mask
Min=0x0, Max=0xff
Socket 1
Channel 0~5
Rank Enable
Bit Mask
Socket 2
Channel 0~5
Rank Enable
Bit Mask
Socket 3
Channel 0~5
Rank Enable
Bit Mask