AIC Lynx - Page 64

56
Chapter 4. BIOS Conguration SettingsLynx User Manual
USB
Conguration
USB Precondition Enable Disable
XHCI Manual Mode Enable Disable
Trunk Clock Gating
(BTCG)
Enable Disable
Enable USB 3.0
pins
Enable Disable
USB 3.0 pin
#1~#10
Enable Disable
USB Per-Connector
Disable
Enable Disable
USB HS Physical
Connector #0~13
Disable
Enable Disable
USB SS Physical
Connector #0~9
Disable
Enable Disable
USB XHCI MSI
Disable WA
Enable Disable
XHCI Over Current
Pins
Enable Disable
XHCI Wake On Usb
Enable
Enable Disable
Place XHCI BAR
below 4GB
Enable Disable
Security
Conguration
SMM BIOS Write
Protect
Enable Disable
Platform
Thermal
Conguration
PCH Thermal
Device
Auto
Enabled in
ACPI mode
Enabled in
PCI mode
Disable
Trace Hub
Conguration
Menu
Trace Hub Enable
Mode
Target Debugger Host Debugger Disable
MemRegion 0/1
Buffer Size
1MB 5MB 8MB 64MB
PCH DFX
Conguration
Reveal PCH P2SB
device
Enable Disable
Unlock PCH P2SB Enable Disable
PMC Read Disable Enable Disable
SPD Write Disable Enable Disable
Hide Trace Hub Enable Disable
GPIO Lockdown Enable Disable
RTC Lock Enable Disable
BIOS Lock Enable Disable
Gbe Flash Lock-
Down
Enable Disable
Unlock Thermal
Registers
Enable Disable
Flash Lock-Down Auto Enable Disable
MROM 0/1 Hook Enable Disable