AIC Lynx - Page 86

78
Chapter 5. BMC Conguration SettingsLynx User Manual
Maintenance Procedure
Backup Conguration
1. Click Check All to backup the selected conguration items. The Backup
Conguration page will appear Click Download Cong to save the backup
le to the client system
2. Click OK to perform the backup action. The Backup le will be saved in the
client system.
3. Click Cancel to cancel the backup process.
Firmware Image
Location
1. Click the conguration items on the list.
2. Click Save to save any changes made.
Firmware Information Read only.
Firmware Update
This wizard takes you through the process of firmware upgradation. A reset
of the box will automatically follow if the upgrade is completed or cancelled.
An option to Preserve All Configuration is available. Enable it, if you wish to
preserver congured settings through the upgrade.
Click Start Firmware Update to start the rmware update process.
Preserve Conguration
This page allows the user to configure the preserve configuration items,
which will be used by the Restore factory defaults to preserve the existing
conguration without overwriting with defaults/Firmware Upgrade conguration.
Click Save to save any changes made.
Restore Conguration
1. Click Upload to restore the backup les.
2. Click OK to upload the new conguration le and restore.
Restore Factory
Defaults
1. Click the conguration items on the list to preserve the settings during
restore factory default conguration.
2. Click Restore Factory Defaults to restore the factory defaults of the device
rmware.