MIL-STD-1553 Reference Manual
Chapter 11 – General I/O Functions
11 GENERAL I/O (GENIO) FUNCTIONS
Chapter 11 defines the GenIo function calls of the API S/W Library. The GenIo functions are
used to handle acquisition functions. Data acquisition is performed direct access from the ASP processor
on the APX board.
Table 11-I – GenIo Function Descriptions
Initialise IO module access address for ASP
Write data to output channel of IO module
Read data from output channel of IO module
Read data from input channel of IO module
Enable /Disable Sampling Task
Handle sequences of discrete signal changes
To Next Page
Loading...
