MIL-STD-1553 Reference Manual
Appendix A – Document/Software History
General or S/W Function
Change
Changed prototype of interrupt function
Corrected global documentation errors
Added detailed return code description for functions
Corrected description for parameter ‘xid’
Extended description for parameter ‘instr’
Corrected description for “buffer header”
Corrected description for parameter ‘cnt’
Corrected description for parameter ‘xid’
Extended description for parameter ‘retr’
Added parameters ‘tbm’ and ‘gsb’
Added parameter ‘maj_frame_addr’
Added parameter ‘min_frame_addr’
Corrected description for “buffer header”
Changed parameter ‘rsize’ to ‘lWordsRead’
Corrected description for parameter ‘offset’
Corrected description for parameter ‘offset’
Extended description for parameter ‘ptype’
Extended description for parameter ‘sgn’
Extended description for parameter ‘offset’
Corrected description for “c01” and “c02”
Corrected description for parameter ‘bid’
Corrected description for parameter ‘bid’
Corrected description for parameter ‘bid’
Corrected description for parameter ‘mode’
Corrected description for parameter ‘fifo_nbr’
Corrected description for “buffer header”
Corrected description for “buffer header”
Corrected documentation error step descriptions for
parameter “resp_time” was different to what was
described in the purpose section
Corrected description for parameter ‘rt’
Corrected description for parameter ‘smod’
Corrected description for “buffer header”
Extended description for parameter “clr”
Value descriptions for Api_RT_STATUS_HALTED’ and
Api_RT_STATUS_BUSY’ were wrong
Corrected description for parameter ‘mode’
Renamed to ApiReadMemData
Added parameter ‘memtype’
To Next Page
