Aim MIL-STD-1553 - Page 479

MIL-STD-1553 Reference Manual
465
Appendix A – Document/Software History
Version
General or S/W Function
Change
Description
ApiCmdBCInstrTblGen
Added new value for parameter ‘op’ and parameter ‘par1’
(reset major frame instruction)
ApiCmdBCXferDef
Added new value for parameter ‘rte’ (toggle bus control)
ApiCmdBCAcycSend
Added new vaule
“API_BC_ACYC_SEND_AT_END_OF_FRAME” for parameter
‘mode’
ApiCmdBMStatusRead
Added new parameters ‘glb_msg_cnt_sec’,
‘glb_msg_cnt_pri’, ‘glb_err_cnt_sec’, ‘glb_err_cnt_pri’,
‘bus_load_sec’, ‘bus_load_pri’, ‘bus_load_sec_avg’,
‘bus_load_pri_avg’
ApiReadBSPVersionEx
Corrected description for parameter ‘x_EndDecLcaBiu2Ver’
ApiInstIntHandler
Changed description for parameter ‘x_InfoLlc’
ApiCmdReplayStatus
Corrected description for parameter ‘prepstatus’
ApiBHModify
Added
ApiCmdRTSACon
ApiCmdRTSAConErr
ApiCmdRTSAMsgRead
Improved description of parameter ‘sa’
ApiCmdSystagDef
Added description for new systag type “checksum” for
various parameters
ApiCmdBCXferRead
Added new value for parameter ‘clr’
 re-formatted description for parameter ‘clr’
Added new parameters ‘lvw’ and ‘srvw_cnt’ to structure
TY_API_BC_XFER_DSP
Changed note at end of function description
ApiCmdGetIrigTime
ApiCmdSetIrigTime
Added description for all parameters
Added new parameters ‘mode’, ‘irig_src’ and ‘irig_sync’
ApiCmdSystagCon
Added value API_SYSTAG_RECALC_CHECKSUM for
parameter ‘con’
ApiCmdBMDytagMonDef
ApiCmdBMDytagMonRead
Added
ApiCmdIni
Extended description for parameter ‘pbi_id_biu1’ and
‘pbi_id_biu2’
ApiSetDllDbgLevel
Corrected note 3
ApiSysSetMemPartition
Corrected type of variable ‘px_MemInfo’
ApiReadMemData
ApiWriteMemData
ApiReadBlockMemData
ApiWriteBlockMemData
Added note in description for parameter ‘data_p’
ApiCmdBCSrvReqVecCon
Moved description of parameter ‘px_SrvReqVecCon’ from
Output section to Input section
ApiCmdQueueFlush
Corrected purpose section
ApiCmdQueueRead
Corrected purpose section
Corrected description of structure ‘TY_API_QUEUE_BUF’