Need help?Do you have a question about the Aim MXL2 and is the answer not in the manual?
Describes how to connect and configure the ECU for data acquisition.
Details the 8 analog inputs and their configuration in Race Studio 3.
Step-by-step guide to configuring the MXL2 as a WiFi AP.
How to join the MXL2 to an existing WiFi network (WLAN).
Details configuration for a high-performance WLAN setup.
Introduces RaceStudio3 software and its main functions.
Managing configurations, creating new ones, and organizing them.
Configuring analog inputs, speed inputs, and RPM inputs.
Configuring shift lights, alarms, and digital output signals.
Establishing connection between the system and the PC.
Viewing live data and calibrating sensors within RaceStudio3.
Downloading recorded data from the system to the PC.
Describes how to connect and configure the ECU for data acquisition.
Details the 8 analog inputs and their configuration in Race Studio 3.
Step-by-step guide to configuring the MXL2 as a WiFi AP.
How to join the MXL2 to an existing WiFi network (WLAN).
Details configuration for a high-performance WLAN setup.
Introduces RaceStudio3 software and its main functions.
Managing configurations, creating new ones, and organizing them.
Configuring analog inputs, speed inputs, and RPM inputs.
Configuring shift lights, alarms, and digital output signals.
Establishing connection between the system and the PC.
Viewing live data and calibrating sensors within RaceStudio3.
Downloading recorded data from the system to the PC.
General| CAN connections | 2 |
|---|---|
| Analog inputs | 8 |
| RPM input | 1 |
| Speed inputs | 2 |
| Shift light array | Yes |
| Alarm LEDs | Yes |
| Body | Aluminum |
| Communication | USB, Wi-Fi |
To Next Page
