SPEED
15
MXL2
8. Analog inputs
MXL2 has 8 analog inputs, recorded up to
1000 times per second each.
You can connect:
n
0-5 Volt signals
n
ratiometric potentiometers
n
pressure sensors
n
thermo-resistances
n
K-type thermocouples
Please follow these steps, using the
software RaceStudio3 to set the channels:
n
connect the sensor to the desired input
n
enable the channel in the Channels table
n
select the proper sensor type; sensors of
many different types are properly handled
n
set the sampling frequency
n
set the unit of measure.
MXL2 MANUALE ENG OK 2016.qxp_Layout 1 28/10/16 14:36 Pagina 16
To Next Page
Loading...
