17
MXL2
You can configure them in order to turn
them on or off depending on the value of
the analog or digital inputs, ECU values,
expansions values, GPS information or
math channels.
To each event you can associate an alarm
LED, a message and a digital output.
You can configure it in order to turn them
off when the condition disappears, when
you turn the system off, when you push a
pushbutton or when the data are
downloaded.
Please refer to the related section in order
to see how to use RaceStudio3 to manage
the Output Signals.
MXL2 MANUALE ENG OK 2016.qxp_Layout 1 28/10/16 14:36 Pagina 18
To Next Page
Loading...
