WIFI CONFIGURATION
27
MXL2
In order to get the connectivity to the device, the user’s PC also has to be
authenticated to the same network, as clarified in the following figure.
Once the user’s PC is authenticated to the same network called “network_1,” it can
see the AiM device previously configured to gain access to the target network.
In the previous picture, two AiM devices are connected to the WLAN network_1.
MXL2 MANUALE ENG OK 2016.qxp_Layout 1 28/10/16 14:36 Pagina 28
To Next Page
Loading...
