Aiphone GT SYSTEM User Manual

- 33 -
GT-NS-V/GT-NS GT-DMV/GT-DM
SELECT LANGUAGE SELECT LANGUAGE
MENU
:ENTER
SELECT LANGUAGE
GUIDE LANGUAGE
CHANGE ID CODE
GT-MK
● Program Mode
Setting method5-2
Settings can be performed with the GT-NS-V/GT-NS, GT-DMV/GT-DM, and the GT-MK.
Programming cannot be performed from a security guard station if there is a record of an emergency alarm.
1 Check on the display that the unit is in the standby mode.
• When performing the initial settings, "WELCOME" will display at the entrance station and "AIPHONE" will display on the security guard
station GT-MK.
2 Press [#], [ ] on the 10 key and enter the 4-digit ID code.
• The initial ID code is "1111".
3 When "RE-ENTER ID CODE" is displayed, re-enter [ ] and the 4-digit ID code.
4 After entering the program mode, the first setting item displays.
1 1 1 1
Initial ID code
GT-MK
GT-NS-V/GT-NS GT-DMV/GT-DM
RE-ENTER ID CODE RE-ENTER ID CODE
1 1 1 1
:CANCEL
ENTER ID CODE
RE-ENTER ID CODE
_
Initial ID code
GT-MKGT-NS-V/GT-NS GT-DMV/GT-DM
AIPHONE
WELCOME
WELCOME

Aiphone GT SYSTEM Specifications

General

Wiring	2-wire
Door Release	Yes
Operating Voltage	24V DC
Wire Gauge	18 AWG
Type	Intercom System
Power Source	24V DC
Installation	Surface-mounted
Communication	Hands-free
Expandability	Expandable to multiple door stations and master stations
Mounting	Wall-mount
Operating Temperature	14°F to 140°F (-10°C to 60°C)
Humidity Range	10% to 90% (non-condensing)
Frequency Response	300 Hz to 3.4 kHz
Maximum Stations	500
Maximum Door Stations	32 door stations