- 42 -
● Enter the program mode with the GT-NS-V/GT-NS, GT-DMV/GT-DM or GT-MK and select "SET TIMER".
• Operation timer: If the operation panel is not operated for a certain period of time, the system returns to standby mode. The initial setting is 15
seconds.
• Program timer: If an operation is not performed for a certain period of time in the program mode, the program mode will automatically be can-
celled. The initial setting is 60 seconds.
• Call timer: Calls from entrance stations and security guard stations will expire after a certain period of time. The initial setting is 45 seconds.
• Door release timer: Set the time for when the door is locked again after a door release operation. The initial setting is 0 seconds.
● Entrance station (Unit type) door release timer: Set the GT-DA-L/GT-DA
with volume VR1.
Setting the input timeout timer5-10
Set the operation timer in the range from 15 to 99 seconds.
Set the program timer in the range from 30 to 99 seconds.
Set the call timer in the range from 30 to 99 seconds.
Set the door release timer in the range from 00 to 20 seconds.
If the timer is set at 00 seconds, the door will be released only
while the button is pressed.
GT-DMV/GT-DMGT-NS-V/GT-NS, GT-MK
OPERATION TIMER
15
SET TIMER
PROGRAM TIMER
60
CALL DURATION
45
MENU
:ENTER
ACCESS CODE
RESIDENT INFO.
SET TIMER
0
3
E
D
F
0
0
6
N
M
O
2
B
A
C
9
Y
X
W
Z
0
15~99
30~99
30~99
00~20
SET TIMER
OPERATION TIMER
15 s
INPUT 15-99
:QUIT
:NEXT
SET TIMER
PROGRAM TIMER
60 s
INPUT 30-99
:QUIT:NEXT
SET TIMER
CALL DURATION
45 s
INPUT 30-99
:QUIT
:NEXT
SET TIMER
RELEASE TIMER
15 s
INPUT 00-20
00=WHILE PRESSED
:QUIT
:NEXT
Next menu item
* Entrance stations (Integrated type) only
0.5 M
20
1
0
3
GT-DA-L/GT-DA
0.5 to 20: 0.5 to 20 seconds
M: While door release button is pressed
To Next Page
Loading...
Need help?
General
