- 40 -
Transfer link setting information set at an entrance station or security guard station to other entrance stations and security guard stations.
● Enter the program mode and select "TRANSFER DATA".
Transferring link information5-8
Enter an entrance station number (1 to 16) for the transferred station. If
"0" is entered, a security guard station will be the transferred station.
With an expanded system, the entrance stations IDs are as shown below.
• Connected to same common line: ID remains the same (Ex.: Enter "2"
to transfer to #2)
• Connected to separate common line: ID + 8 (Ex.: Enter "9" to transfer
to #1)
Enter a security guard station number (1 to 4) for the transferred station.
With an expanded system, the security guard station IDs are as shown
below.
• Connected to same common line: ID remains the same (Ex.: Enter "2"
to transfer to #2)
• Connected to separate common line: ID + 2 (Ex.: Enter "3" to transfer
to #1)
During transfer, "TRANSFERRING..." is displayed.
1~16
1~4
GT-DMV/GT-DMGT-NS-V/GT-NS, GT-MK
TRANSFER DATA
TRANSFERRING.
DATA TRANSFERRED
MENU
:ENTER
CHANGE GREETING
PROGRAMMING
TRANSFER DATA
TRANSFER DATA
TRANSFERRING...
0
1
1
ENTER UNIT ID#
MAIN ENTRANCE: 2
ENTER UNIT ID#
SECURITY GUARD: 2
:QUIT
TRANSFER DATA
:ENTER
ENTER UNIT ID#
MAIN ENTRANCE: 2
“0” FOR GUARD
:QUIT
TRANSFER DATA
:ENTER
ENTER UNIT ID#
SECURITY GUARD: 2
:QUIT
TRANSFER DATA
DATA TRANSFERRED
Next menu item
To Next Page
Loading...
Need help?
General
