Aiphone GT SYSTEM User Manual

- 45 -
Set the entrance station display to show room numbers or to display only resident names. The initial setting is for the room number to also display.
● GT-NS-V/GT-NS: Switch this setting with 2 of SW1.
The scroll speed for messages and resident names (17 characters or more) that display on entrance station and security guard station displays can be
changed. The initial setting is "5".
● GT-NS-V/GT-NS
, GT-DMV/GT-DM, GT-MK: Enter the program mode and select "SCROLL SPEED".
Set a digit from 0 to 9. 0 = Slow 9 = Fast.
● GT-DMV/GT-DM: Enter the program mode and select "DISPLAY ROOM NO.". Select ON (room number also displays) or OFF (only resident
name displays).
Room number display setting
Scroll speed setting
5-14
5-15
GT-DMV/GT-DM
DISPLAY ROOM NO.
OFF
ON
:ENTER
MENU
:ENTER
CALL-IN DISPLAY
LIGHT OR CCTV
DISPLAY ROOM NO.
Next menu item
GT-NS-V/GT-NS
SW1
2
ON
1
2 3
4
Display only resident name
Display room number also
0-9
GT-NS-V/GT-NS/GT-MK GT-DMV/GT-DM
MENU
:ENTER
VERIFY PROGRAM
SCROLL SPEED
MONITOR ENTRANCE
SCROLL SPEED
5
SLOW 0----9 FAST
:ENTER
SCROLL SPEED
SCROLL SPEED
5
7
R
Q
P
S
Next menu item

Aiphone GT SYSTEM Specifications

General

Wiring	2-wire
Door Release	Yes
Operating Voltage	24V DC
Wire Gauge	18 AWG
Type	Intercom System
Power Source	24V DC
Installation	Surface-mounted
Communication	Hands-free
Expandability	Expandable to multiple door stations and master stations
Mounting	Wall-mount
Operating Temperature	14°F to 140°F (-10°C to 60°C)
Humidity Range	10% to 90% (non-condensing)
Frequency Response	300 Hz to 3.4 kHz
Maximum Stations	500
Maximum Door Stations	32 door stations