System settings (Settings (Table View))
170
4) Click the cells that correspond to 2) and 3). As the pull-down menu appears, choose blank,
"U," or "M/U."
• Blank: The selected station will not be registered.
• U: Station will be registered in the group. A call is transmitted in unicast transmission.
• M/U: Station will be registered in the group. When called, Video Door Station is
transmitted in multicast and Audio Only Door Station in unicast.
5) When done, click .
• When clicking , the data entered in the shared called group will be registered
to each Master Station, and will be removed from the shared called group section.
6) Click .
No group is registered in the default settings.
Register up to nine groups for each station. For each group, register up to 20 Master
Stations.
When choosing "M/U," configure "2.4. Multicast Address (Master Station and Video Door
Station only)" ➤ P.122.
"Shared Group" registration should be completed prior to individual Door Station group
registration. If a "Shared Group" is configured using the same group number as a Door
Station individual group, the individual group setting will be overwritten.
To Next Page
Loading...