System settings (Settings (Table View))
171
Individual Settings
Configure the group to be registered in each station.
1) Select the station number to be configured from Settings Station Selection pull-down menu.
• The station preceding and following the station selected will be shown.
For example, if "003" is selected, "002," "003," and "004" groups are shown.
2) Scroll to the right using the scroll bar at the bottom of the screen to show the settings station
to be configured.
3) Identify the group to be configured in "Group Registry List."
4) Identify the station to be registered in the group in "Master Station list."
5) Click the cells that correspond to 3) and 4). As the pull-down menu appears, choose blank,
"U," or "M."
• Blank: The selected station will not be registered.
• U: Station will be registered in the group. A call is transmitted as unicast.
• M: Station will be registered in the group. Video is transmitted as multicast. (Video Door
Station only)
6) When done, click .
7) Click .
Settings Station Selection
pull-down menu
Master Station
list
Group Registry List Setting Station Name:
Configure a group from the stations
shown.
1)
2)
4)
3)
5)
To Next Page
Loading...