System Settings (Settings (Station View))
212
Frame Rate [fps] ♠ (Video Door Station only)
Select Profile [H.264 / AVC] (Video Door Station only)
I-picture interval [H.264 / AVC] ♦ (Video Door Station only)
Bit rate [kbps] [H.264 / AVC] ♠ (Video Door Station only)
Select Quality [Motion-JPEG] ♠ (Video Door Station only)
RTP Start Port ♦ (Master Station and Video Door Station only)
RTP End Port ♦ (Master Station and Video Door Station only)
Description Select the frame rate.
Settings 1, 3, 5, 7.5, 10, 15, 20, 30 fps
Default values 15 fps
Description Select the profile for H.264 / AVC.
Settings • Baseline
•Main
•High
Default values Main
Description
Set the interval for transmitting pictures with H.264 / AVC.
Settings 1-100
Default values 15
Description Select the bit rate for H.264 / AVC.
Settings 64, 128, 256, 384, 512, 768, 1024, 2048 kbps
Default values 1024 kbps
Description Set the image quality of Motion-JPEG.
Settings 1 (Low) through 10 (High)
Default values 6
Description Set the start port for the RTP communication range.
The (RTP End Port) should be greater than 90 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
Settings 1-65534
Default values 30000
Description Set the end port for the RTP communication range.
The (RTP End Port) should be greater than 90 digits from the (RTP Start Port). If a
smaller range is set, in some cases ports outside the range will still be used.
Settings 1-65535
Default values 31000
To Next Page
Loading...