System Settings (Settings (Station View))
213
2.5.2. Video Encoder 2
Set when transmitting video using ONVIF.
When viewing video of Video Door Station with other manufacturer's product, refer to
"2.5.3. Viewing video from Door Station with 3rd party products (ONVIF)" ➤ P.215.
These settings may be changed by ONVIF-compliant 3rd party products, if utilized. Refer
to the manual of the 3rd party product to be used.
Second Video Encoder ♠ (Video Door Station only)
Coding System ♠ (Video Door Station only)
Resolution ♠ (Video Door Station only)
Frame Rate [fps] ♠ (Video Door Station only)
Select Profile [H.264 / AVC] (Video Door Station only)
Description Enable / Disable the dual stream function.
Set to "Enable" when transmitting video through ONVIF.
Settings • Enable
• Disable
Default values Enable
Description Select the coding system for the video.
Settings • H.264 / AVC
• Motion-JPEG
Default values H.264 / AVC
Description Select the resolution for the video.
Settings • 320x240 (QVGA)
• 640x480 (VGA)
Default values 320x240 (QVGA)
Description Select the frame rate.
Settings 1, 3, 5, 7.5, 10, 15, 20, 30 fps
Default values 15 fps
Description Select the profile for H.264 / AVC.
Settings • Baseline
•Main
•High
Default values Main
To Next Page
Loading...