Air Techniques ScanX Touch - Language, Date;Time, Network Settings; Touch Screen and Main Menu

Page 31Air Techniques, Inc.
OPERATION
Editing settings for the network
1. Touch Name.
2. Enter the values via the keyboard.
3. Touch Interface.
4. Select LAN or WLAN via the arrows.
5. Touch OK.
6. Touch DHCP to activate or deactivate.
The IP address, subnet mask and gateway can only be edited if DHCP is deactivated
• Touch IP address, subnet mask and Gateway
• Enter values via the keyboard
Editing settings for the touch screen
1. Touch Brightness.
2. Enter the values via the arrows.
3. Touch OK.
4. Touch Calibrate touch screen.
5. Follow the instructions on the monitor.
6. Touch OK.
Choosing the language
1. Touch the required language.
2. Touch OK.
Editing the Date & Time
1. Touch Date and Time.
2. Enter the values using the arrows.
3. Touch OK.
If the unit is operated from a PC, the display of
date and time is automatically synchronized with
the selected regional display for the PC.
9.6. Main menu
The following actions can be selected :
Image editing View and edit X-ray images saved on the SD card:
Brightness, contrast, rotate, invert, magnify, reduce.
Delete X-ray image
Scanning Scanningorderstartswiththespecicationofthepatient
and imaging information
X-ray image is stored on the SD card together with the
image information under the name of the patient.
Intra Rapid
Rapid scanning
Thescanningorderstartswithoutspecicationofthe
patient and image information
The X-ray image is stored on the SD card in a folder with
date and time.