Need help?Do you have a question about the Air Techniques PROVECTA HD and is the answer not in the manual?
General| Sensor Technology | CMOS |
|---|---|
| Type | Intraoral X-ray |
| Focal Spot Size | Not applicable |
| Exposure Time Range | Not applicable |
| Power Requirements | AC 110-240 V, 50/60 Hz |
Provides a visual and textual overview of the Provecta HD system components.
Details electrical, X-ray tube, and general technical specifications of the system.
Provides detailed dimensional drawings and specifications for various arm lengths.
Lists items included in delivery, special accessories, required tools, and FDA reporting.
Lists all components included in the Provecta HD unit package.
Lists optional accessories available for the Provecta HD system.
Lists tools necessary for installation but not included in the package.
Details requirements for reporting equipment installation to the FDA.
Lists and illustrates all hardware components required for mounting the unit.
Covers site survey, environment requirements, and electrical outlet specifications.
Specifies the structural load requirements for wall mounting the Provecta HD unit.
Details the necessary line voltage, exposure current, and fuse rating.
Outlines maximum wire lengths and gauge requirements for power and remote connections.
Illustrates six different configurations for remote switch and keypad connections.
Provides a step-by-step overview of the Provecta HD installation process.
Details the steps to disassemble the control unit to access the base unit.
Explains how to set the lock slide to control horizontal arm rotation.
Describes two methods for mounting the base unit to the wall.
Guides the user through the process of mounting the horizontal arm.
Provides instructions for attaching the scissor arm to the horizontal arm.
Details the procedure for mounting the X-ray emitter onto the scissor arm.
Explains how to connect the system to the mains power supply.
Guides on connecting the handheld exposure button to the PCB.
Details the steps for reassembling the control unit after access.
Describes how to adjust the balance and spring tension of the scissor arm.
Explains the connection of the door interlock system for safety.
Covers operational procedures, including acceptance tests and generator warm-up.
Outlines the necessary tests for commissioning the X-ray system.
Details the required electrical safety checks and documentation.
Describes the procedure for powering on the unit and indicator lights.
Explains the warm-up procedure to prolong tube life.
Guides on navigating and adjusting settings within the service menu.
To Next Page
