Air Techniques, Inc.
Page
4
2.7 Only use original parts
• Only Air Techniques parts or accessories and
special accessories specifically approved by
Air Techniques may be used.
• Only use original working parts and spare
parts.
Air Techniques cannot accept any liabili-
ty for damage caused by the use of ac-
cessories and special accessories not
specifically approved by Air Techniques
or not using original working parts and
spare parts.
2.8 Transport
The original packaging offers the optimum pro-
tection for the appliance during transport.
If required, the original packaging for the unit
can be ordered at Air Techniques.
Air Techniques cannot accept any liabili-
ty for damage caused during transport
by the use of unsuitable packaging, this
is also valid during the warranty term.
• Only transport the appliance in its original
packaging whenever possible.
• Keep the packing materials out of the reach of
children.
• Attach the transport locking devices again.
• Do not expose the device to any strong
shocks.
• Do not bump or pull the unit.
2.9 Disposal
The equipment contains - in some of its parts
- solid and liquid substances which must be dis-
posed of at appropriate recycling centers con-
forming to all local, state and federal regulations.
In particular, the equipment contains the follow-
ing materials and/or components:
Tubehead:
Non-biodegradable plastic materials, metals,
glass, dielectric oil, lead, tungsten.
Other parts:
Non-biodegradable plastics, metals, printed
circuits, and electronic components.
Air Techniques is not responsible for dis-
posal of the apparatus or parts thereof
and for the related expenses.
Important Information
2.10 Model identification plate
Appliance
The model identification plate is located on the
rear side of the control unit housing.
REF Order number
SN Serial number
UDI Unique device identification code
X-ray tube head
The model identification plate is located on the
rear side of the X-ray unit.
REF Order number
SN Serial number
To Next Page
Loading...
