Airspan AirSpeed 2900 - Appendix A. Installation Checklist

AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N DUG01085 Rev. A, Nov 2021
34
Appendix A. Installation Checklist
During installation, review and perform all the steps on this checklist (in the given order). This
checklist is meant for the person who performs the AirSpeed 2900 installation.

To make sure you complete all the tasks, detach or print this checklist and use it as a job
aid. After performing, check off each task.
Procedure
Action
Check If Performed
Verify the prerequisites
Verify the site requirements.
☐
Verify the installation requirements.
☐
Verify the tool requirements.
☐
Verify the parts & kits required.
☐
AirSpeed 2900 installation
Install Tilt bracket on the AirSpeed 2900.
Install the GPS antenna on the unit.
☐
Install the Pole/Wall bracket on the Pole
or Wall.
☐
Install AirSpeed 2900 on the mounting
bracket (as required).
☐
Connect & manage Cables
Connect Ground, SFP & Ethernet cable(s)
☐
Connect power system
Connect power cable
☐