Maintenance
Check the functioning of KeyPad TouchScreen regularly. The optimal frequency
of checks is once every three months. Clean the device enclosure of dust,
cobwebs, and other contaminants as they emerge. Use a soft dry wipes suitable
for equipment care.
Do not use substances that contain alcohol, acetone, petrol, and other active
solvents to clean the device. Wipe the touch screen gently.
Runs up to 1.5 years from the pre-installed batteries — calculated value for the
default settings and up to 4 daily interactions with the keypad.
The system will send an early warning about replacing the batteries. When
changing the security mode, the LED will slowly light up and go out.
Technical specications
Warranty
5. Turn on the keypad and place it on the mounting panel.
6. Check the status of batteries and external power in the Ajax app and the
overall operation of the device.
All technical specications of KeyPad TouchScreen
Compliance with standards
To Next Page
Loading...
Need help?
General
