Depending on the settings, the KeyPad TouchScreen built-in buzzer noties
about:
Keypad runs on pre-installed batteries. It can also be powered by a third-party
power supply unit with voltage range 10.5–14 V⎓ and operating current from 0.5
A. When external power is connected, the pre-installed batteries are used as a
backup power source.
Security control
KeyPad TouchScreen can arm and disarm the entire object or separate groups,
and activate Night mode. Use the Control tab to change the security mode. You
can control the security with KeyPad TouchScreen using:
alarms;
security mode change;
entry/exit delays;
triggering of the opening detectors.
1. Smartphones. With the installed app and Bluetooth
Low Energy (BLE) support. Smartphones can be used instead of Tag or Pass
Ajax Security System
To Next Page
Loading...
Need help?
General
