Akai AK32DLEDN User Manual

22
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on your remote control
or the control panel of your TV. The on screen display menu shows the diagram below on
your screen, and you can either press the SOURCE button on your TV control panel or the
arrows buttons on your remote control to choose an input signal source.
You can choose from the following input sources if you have audio and video devices
connected to your TV.
When you switch on the TV for the first time, you need to select the language and the
country to auto search fro all the DTV programmes in your area.
• Press SOURCE button to display the input source list.
• Press / buttons to select the input source you want to watch.
• Press OK / button to enter the input source.
• Press EXIT button to quite.
On Screen Display when you change the volume
1. You can press the VOL + button to increase the volume and VOL - button to decrease
the volume.
2. The MUTE symbol will show on the corner of your screen when you press the MUTE
button, press the MUTE button again to unmute sound.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level on the volume indicator.
22
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on your remote control
or the control panel of your TV. The on screen display menu shows the diagram below on
your screen, and you can either press the SOURCE button on your TV control panel or the
arrows buttons on your remote control to choose an input signal source.
You can choose from the following input sources if you have audio and video devices
connected to your TV.
When you switch on the TV for the first time, you need to select the language and the
country to auto search fro all the DTV programmes in your area.
• Press SOURCE button to display the input source list.
• Press / buttons to select the input source you want to watch.
• Press OK / button to enter the input source.
• Press EXIT button to quite.
On Screen Display when you change the volume
1. You can press the VOL + button to increase the volume and VOL - button to decrease
the volume.
2. The MUTE symbol will show on the corner of your screen when you press the MUTE
button, press the MUTE button again to unmute sound.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level on the volume indicator.
22
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on your remote control
or the control panel of your TV. The on screen display menu shows the diagram below on
your screen, and you can either press the SOURCE button on your TV control panel or the
arrows buttons on your remote control to choose an input signal source.
You can choose from the following input sources if you have audio and video devices
connected to your TV.
When you switch on the TV for the rst time, you need to select the language and the
country to auto search fro all the DTV programmes in your area.
• Press SOURCE button to display the input source list.
• Press / buttons to select the input source you want to watch.
• Press OK / button to enter the input source.
• Press EXIT button to quite.
On Screen Display when you change the volume
1. You can press the VOL + button to increase the volume and VOL - button to decrease
the volume.
2. The MUTE symbol will show on the corner of your screen when you press the MUTE
button, press the MUTE button again to unmute sound.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level on the volume indicator.
18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
When you switch on this TV f
e, you need to select the language and
the country to auto search for all the DTV programs in your area.
• Press SOURCE button to display the input source list.
• Press
button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source
Selecting and Input Source
ou can select an input signal source by pressing the SOURCE button on the remote con
ontrol panel of your TV. The on screen display menu shows the diagram below on the y
nd you can either press the SOURCE button on the control panel or the arrows buttons o
mote control to choose an input signal source.
ou can choose from the following input sources if you have your audio and video devic
onnected to your TV.
hen you switch on this TV for the first time, you need to select the language and the
ountry to search all the available programs in your area.
● Press SOURCE button to display the input source list.
● Press ▲/▼ button to select the input so
urce you want to watch.
● Press OK button to enter the input source.
● Press EXIT button to quit.
On Screen Display when you change the volume
When you press the VOL+ to increase the volume and VOL- to reduce the volume, the
below shows on your screen for several seconds.
The MUTE symbol will show on one of your screen corners when you press the MUTE
press the MUTE button again and the symbol will disappear.
You can put the sound on again either by pressing the MUTE button or the VOL+ but
diagram below shows your sound level.
18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
When you switch on this TV f
e, you need to select the language and
the country to auto search for all the DTV programs in your area.
• Press SOURCE button to display the input source list.
• Press
button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source
22
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on your remote control
or the control panel of your TV. The on screen display menu shows the diagram below on
your screen, and you can either press the SOURCE button on your TV control panel or the
arrows buttons on your remote control to choose an input signal source.
You can choose from the following input sources if you have audio and video devices
connected to your TV.
When you switch on the TV for the first time, you need to select the language and the
country to auto search fro all the DTV programmes in your area.
• Press SOURCE button to display the input source list.
• Press / buttons to select the input source you want to watch.
• Press OK / button to enter the input source.
• Press EXIT button to quite.
On Screen Display when you change the volume
1. You can press the VOL + button to increase the volume and VOL - button to decrease
the volume.
2. The MUTE symbol will show on the corner of your screen when you press the MUTE
button, press the MUTE button again to unmute sound.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level on the volume indicator.
22
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on your remote control
or the control panel of your TV. The on screen display menu shows the diagram below on
your screen, and you can either press the SOURCE button on your TV control panel or the
arrows buttons on your remote control to choose an input signal source.
You can choose from the following input sources if you have audio and video devices
connected to your TV.
When you switch on the TV for the rst time, you need to select the language and the
country to auto search fro all the DTV programmes in your area.
• Press SOURCE button to display the input source list.
• Press / buttons to select the input source you want to watch.
• Press OK / button to enter the input source.
• Press EXIT button to quite.
On Screen Display when you change the volume
1. You can press the VOL + button to increase the volume and VOL - button to decrease
the volume.
2. The MUTE symbol will show on the corner of your screen when you press the MUTE
button, press the MUTE button again to unmute sound.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level on the volume indicator.
18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
When you switch on this TV f
e, you need to select the language and
the country to auto search for all the DTV programs in your area.
• Press SOURCE button to display the input source list.
• Press
button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source
Selecting and Input Source
ou can select an input signal source by pressing the SOURCE button on the remote con
ontrol panel of your TV. The on screen display menu shows the diagram below on the y
nd you can either press the SOURCE button on the control panel or the arrows buttons o
mote control to choose an input signal source.
ou can choose from the following input sources if you have your audio and video devic
onnected to your TV.
hen you switch on this TV for the first time, you need to select the language and the
ountry to search all the available programs in your area.
● Press SOURCE button to display the input source list.
● Press ▲/▼ button to select the input so
urce you want to watch.
● Press OK button to enter the input source.
● Press EXIT button to quit.
On Screen Display when you change the volume
When you press the VOL+ to increase the volume and VOL- to reduce the volume, the
below shows on your screen for several seconds.
The MUTE symbol will show on one of your screen corners when you press the MUTE
press the MUTE button again and the symbol will disappear.
You can put the sound on again either by pressing the MUTE button or the VOL+ but
diagram below shows your sound level.
18
You can select an input signal source by pressing the SOURCE button on the your
remote control or control panel of your TV. The on screen display menu shows the
diagram below on the your screen, and you can either press the SOURCE button on the
control panel or the arrows buttons on your remote control to choose an input signal
source.
You can choose from the following input sources if you have your audio and video
devices connected to your TV.
When you switch on this TV f
e, you need to select the language and
the country to auto search for all the DTV programs in your area.
• Press SOURCE button to display the input source list.
• Press
button to select the input source you want to watch
• Press OK / button to enter the input source.
• Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+
button. The diagram below shows you the sound level in the volume indicator.
Selecting an Input Source

Akai AK32DLEDN Specifications

General

Brand	Akai
Model	AK32DLEDN
Category	LCD TV
Language	English