Akuvox C319A User Manual

AKUVOX SMART INTERCOM www.akuvox.com
50
 Connect Mode: It is automatically set up according to the actual device
connection with a specific server in the network such as SDMC or Cloud
and None. None is the default factory setting indicating the device is not
in any server type, therefore you are allowed to choose Cloud, SDMC in
discovery mode.
 Discovery Mode: check to turn on the discovery mode of the device so
that it can be discovered by other devices in the network, and uncheck if
you want to conceal the device so as not to be discovered by other
devices.
 Device Node: specify the device address by entering device location info
from the left to the right: Community, Unit, Stair, Floor, Room in sequence.
 Device extension: enter the device extension number for the device you
installed.
 Device Location: enter the location in which the device is installed and
used.
10.3. Device NAT Setting
NAT (Network Address Translation) allows hosts in an organization’s private
intranet to transparently connect to hosts in the public domain. There is no
need for internal hosts to have registered Internet addresses. It is a way to
translate the internal private network IP address into a legal network IP
address technology. To set up NAT, you can do it on web Account >
Advanced > NAT interface.

Akuvox C319A Specifications

General

Brand	Akuvox
Model	C319A
Category	Monitor
Language	English