Akuvox C319A - Device Bluetooth Setting; Device Bluetooth Pairing

AKUVOX SMART INTERCOM www.akuvox.com
51
Parameter Set-up:
 UDP Keep Alive Messages: if checked, the device will send out the
message to the SIP server so that SIP server will recognize if the device
is in online status.
 UDP Alive Msg Interval: set the message sending time interval from 5-60
seconds, the default is 30 seconds.
 RPort: check the RPort when the SIP server is in WAN (Wide Area
Network).
10.4. Device Bluetooth Setting
10.4.1. Device Bluetooth Pairing
After X933/C319 series indoor monitors turn on the Bluetooth on the device
Setting > Bluetooth screen, it can be paired with other device via Bluetooth.