Akuvox C319A - Door Access Control Configuration; Relay Switch Setting; Local Relay Setting

AKUVOX SMART INTERCOM www.akuvox.com
96
15. Door Access Control Configuration
15.1.Relay Switch Setting
15.1.1. Local Relay Setting
Local relays in X933/C319 indoor monitor can be used to trigger relay for the
door access and trigger Chime bell as needed in different scenarios. You can
do this configuration on web Phone - Relay - Relay Setting - Local Relay
interface.
Parameter Set-up:
 Relay Delay: Set the relay delay time after the relay is triggered.
 Relay Type: Set relay action type. There are two types of relay, chime bell
and open door. Chime Bell, when there is a call, the chime bell will ring.
Open door, when press the unlock icon, the local relay will be opened.
 Remote Control: Enable it to trigger local relay by DTMF and vice versa.