Akuvox SP-R50P User Manual

20
3.15.Hot line
The Hot line refers to the number you often dial. You can set hot lines in the phone,
the phone will dial the hot line number automatically when you pick up the handset,
press the hand-free or the account key. Also you can set the timeout of dialing the
hot line number, and then the phone will dial the hot line number automatically after
the timeout interval.
To configure Hot line via Phone interface:
1. Press Menu -->Features-->Hot line-->Enter；
2. Use the Left or Right key to activate or deactivate Hot line；
3. Use the Up or Down key to configure Number and Timeout;
4. Then press the Save key to save the changes.
3.16.Intercom
To configure Intercom via Phone interface:
PATH: Press Menu-->Features-->Programmable keys-->Soft Keys-->Intercom--> Press
Down key to set label/Value/Account--> Save softkey;
1. Press the Intercom key when the phone is available. The phone will connect the
extension number of remote user automatically;
2. Press the Intercom key or the Back softkey to end the intercom;
3. Answer the intercom incoming calling;
4. In default situation, the IP phone Akuvox SP-R50P will answer the intercom
incoming calling automatically and make a noise. You can set the phone to
enable silent mode when picking up the intercom call so that the other party will
not hear you.
The features of intercom：

Akuvox SP-R50P Specifications

General

Brand	Akuvox
Model	SP-R50P
Category	IP Phone
Language	English