Akuvox SP-R50P User Manual

37
2. In the PC Port interface, press the Up or Down key on the phone keyboard to
configure the functionality Enable, VID, Priority.
3. When the VID is empty，press the OK key on the phone keyboard or the Save
softkey to save.
4. Save it after configuration.
4.7. WebServer
In the Advanced Setting interface, press the Up or Down key on the phone keyboard
to select “WebServer,” press OK key on the phone keyboard or the Enter softkey to
access the disable/enable WebServer settings.
4.8. Reset to Factory
In the Advanced Setting interface, press the Up or Down key on the phone keyboard
to select “Reset to factory”, Press the OK key on the phone keyboard or the Enter
softkey to access the reset to factory interface.
4.9. Reboot
This is a function to set the phone reboot.
1. In the Advanced Setting interface, press the Up or Down key on the phone
keyboard to select Reboot;
2.
Press the OK key or the Enter softkey to on the phone keyboard to enter the
reboot warning interface.

Akuvox SP-R50P Specifications

General

Brand	Akuvox
Model	SP-R50P
Category	IP Phone
Language	English