Akuvox SP-R50P User Manual

31
4.2.2. Ring Tones
1. The Ring Tone refers to incoming ring tone, which reminds the user that there is
an incoming call. The IP phone Akuvox SP-R50P supports phone ring tone to
distinguish the incomings from other near phones’ ring tone; At the same time, the
IP phone Akuvox SP-R50P also supports setting specific incoming ring tone for
contacts.
2. To set the ring tone via the phone interface, access Menu -> Settings -> Basic
Setting -> Ring Tones.
4.3. Phone Book
4.3.1. Local Phone Book
The Local Phone Book is used for storing the contacts names and number. The
Akuvox SP-R50P can store up to 500 entries contacts. You can add, edit, delete,
search, or call any contact from the Local Phone Book.
4.3.1.1.1.Add contacts manually：
Add contacts manually from the Local phone book via Phone interface:
Press Phone book -> Local phone book -> Add to Contacts.
Select the relevant group ( For example: contacts) and Press the OK key on the phone
keyboard or the Enter softkey in the UI to enter All Contacts：
1. Press the Add softkey to enter the Add Contact interface.
2. Input name in the relevant area.
3. Press the Down key on the phone keyboard to input the office number in the
relevant area.
4. Press the Down key on the phone keyboard to input mobile number in the
relevant area.

Akuvox SP-R50P Specifications

General

Brand	Akuvox
Model	SP-R50P
Category	IP Phone
Language	English